Moicustom

Small Parts 142007 Steel Self Drilling Screw Zinc Plated Finish

Small Parts 1044KPP Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 2-3/4" Length (Pack of 50)

Category : BISS
Brand : Small Parts
Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Small Parts 0604KW Steel Self-Drilling Screw, Zinc Plated Finish, Hex Washer Head, Hex Drive, #2 Drill Point, #6-20 Thread Size, 1/4" Length (Pack of 100)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Hex washer head has a flange for additional grip with the mating surface
  • Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver
  • Small Parts-1032KWTF Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 2" Length (Pack of 25)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface
  • Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
  • Small Parts 141607KWSMS Steel Self-Drilling Screw, Zinc Plated Finish, Serrated Hex Washer Head, Hex Drive, #2 Drill Point, 1/4"-20 Thread Size, 1" Length (Pack of 50)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening
  • Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver
  • Small Parts 1024KWTFMS Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-24 Thread Size, 1-1/2" Length (Pack of 50)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface
  • Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
  • Small Parts 312407KWSMS Steel Self-Drilling Screw, Zinc Plated Finish, Serrated Hex Washer Head, Hex Drive, #3 Drill Point, 5/16"-18 Thread Size, 1-1/2" Length (Pack of 25)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening
  • Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver
  • Small Parts 1024KWTF Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1-1/2" Length (Pack of 50)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface
  • Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
  • Small Parts 312007KWSMS Steel Self-Drilling Screw, Zinc Plated Finish, Serrated Hex Washer Head, Hex Drive, #3 Drill Point, 5/16"-18 Thread Size, 1-1/4" Length (Pack of 25)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening
  • Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver
  • Small Parts 1016KWTF Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1" Length (Pack of 50)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface
  • Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
  • Small Parts 311207KWSMS Steel Self-Drilling Screw, Zinc Plated Finish, Serrated Hex Washer Head, Hex Drive, #3 Drill Point, 5/16"-18 Thread Size, 3/4" Length (Pack of 25)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening
  • Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver
  • Small Parts 0848KTF Steel Self-Drilling Screw, Zinc Plated Finish, 82 Degree Flat Head, Star Drive, #2 Drill Point, #8-18 Thread Size, 3" Length (Pack of 50)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
  • Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
  • Small Parts 0836KPM Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 2-1/4" Length (Pack of 50)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Modified Truss head is extra wide with a low-profile dome and integral round washer
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Small Parts 0648KPM Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #6-20 Thread Size, 3" Length (Pack of 50)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Modified Truss head is extra wide with a low-profile dome and integral round washer
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Small Parts-0864KPF Steel Self-Drilling Screw, Zinc Plated Finish, 82 Degree Flat Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 4" Length (Pack of 10)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Small Parts 1010KPM Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 5/8" Length (Pack of 50)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Modified Truss head is extra wide with a low-profile dome and integral round washer
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Small Parts 1048KPF Steel Self-Drilling Screw, Zinc Plated Finish, 82 Degree Flat Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3" Length (Pack of 25)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Small Parts-0808KWN Steel Self-Drilling Screw, Zinc Plated Finish, Sealing Hex Washer Head With EPDM Washer, Hex Drive, #2 Drill Point, #8-18 Thread Size, 1/2" Length (Pack of 100)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Sealing hex washer head has a flange with an EPDM rubber washer bonded to the underside to resist leakage, loosening, and damage to the mating surface
  • Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver
  • Small Parts-B009OKF7GY Steel Flat Washer, Zinc Yellow Chromate Plated Finish, Grade 8, ASME B18.22.1, 1" Screw Size, 1-1/16" ID, 2-1/2" OD, 0.145" Thick (Pack of 5)

    Category : BISS
    Brand : Small Parts
    Features
  • Flat washer provides a bearing surface for fastener load distribution or acts as a spacer
  • Grade 8 steel is stronger than grade 5 steel and often used in applications where strength is the primary concern
  • Zinc yellow-chromate plating offers good corrosion resistance
  • Meets ASME B18.22.1 specifications
  • Steel Self-Drilling Screw, Zinc Plated Finish, Flat Head, Phillips Drive, 3" Length, #10-16 Threads (Pack of 100)

    Category : BISS
    Brand : Small Parts
    Features
  • Create their own threads when driven into material
  • Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
  • Flat head style allows fastener to sit flush to the surface
  • Phillips drive is designed to cam out under too much torque
  • Small Parts 0604ABPPBZ Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread Size, 1/4" Length (Pack of 100)

    Category : BISS
    Brand : Small Parts
    Features
  • Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood
  • Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a black reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Small Parts-0606 Steel Sheet Metal Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, Type AB, #6-20 Thread Size, 3/8" Length (Pack of 100)

    Category : BISS
    Brand : Small Parts
    Features
  • Type AB point has a conical tip and fine spaced threads that are suitable for forming threads in thin metals between 0.015" and 0.050" thick and resin impregnated plywood
  • Steel is often used in applications where strength is the primary consideration, and the zinc plating resists corrosion and has a black reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Small Parts B00916YC2Q Steel Machine Screw, Zinc Plated Finish, Round Head, Slotted Drive, Meets ASME B18.6.3, 1" Length, Fully Threaded, 1/4"-20 UNC Threads (Pack of 100)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion resistance and has a reflective appearance
  • Slotted drive has a linear slot for use with a flat-blade driver
  • Round head has a domed shape
  • Meets ASME B18.6.3 specifications
  • Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3" Length (Pack of 50)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Steel Self-Drilling Screw, Zinc Plated Finish, Pan Head, Square Drive, #3 Drill Point, 1/4"-14 Thread Size, 1" Length (Pack of 50)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Square drive resists slippage better than a Phillips or slotted drive
  • Small Parts 04085PP Steel Thread Cutting Screw, Zinc Plated Finish, Pan Head, Phillips Drive, Type 25, #4-24 Thread Size, 1/2" Length (Pack of 100)

    Category : BISS
    Brand : Small Parts
    Features
  • Thread cutting screw with type 25 point has coarse threads that taper down to a blunt edge with a large cutting surface, provides excellent chip clearance, and is suitable for use in plastics and other soft materials
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 2-1/2" Length (Pack of 25)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Steel Self-Drilling Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4" Length (Pack of 100)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a black reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Steel Self-Drilling Screw, Black Zinc Plated Finish, Pan Head, Phillips Drive, #2 Drill Point, #4-24 Thread Size, 1/2" Length (Pack of 100)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a black reflective appearance
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Steel Self-Drilling Screw, Zinc Plated Finish, Serrated Hex Washer Head, Hex Drive, #3 Drill Point, 5/16"-18 Thread Size, 1" Length (Pack of 25)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion and has a reflective appearance
  • Hex washer head has a serrated flange for additional grip on the mating surface that resists loosening
  • Hex drive tightens from the side with a wrench, enabling use when there is no space above for a driver
  • Small Parts B00917M6A0 Steel Machine Screw, Zinc Plated Finish, Pan Head, Phillips Drive, Meets DIN 7985, 14mm Length, Fully Threaded, M4-0.7 Metric Coarse Threads (Pack of 100)

    Category : BISS
    Brand : Small Parts
    Features
  • Steel is often used in applications where strength is the primary consideration
  • Zinc plating resists corrosion resistance and has a reflective appearance
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
  • Pan head has a flat top and short vertical sides with a rounded top edge
  • Meets DIN 7985 specifications