1hz 500khz Dds Functional Signal Generator Signal Source Module Frequency

Function Signal Generator-1HZ-500KHz DDS Functional Signal Generator, Signal Source Module Frequency Counte

Category : BISS
Brand : EVTSCAN
Features
  • ★【Sine Wave Generator】: The main output waveform are sine wave and square‑wave, triangular wave, sawtooth wave
  • ★【Filter Design】: Have a filter (can be turn on/off ) to suit the output of sine wave and pulse wave.
  • ★【High Accuracy】: Due to the high precision and stable frequency of the DDS, it is also very suitable for the oscilloscope's scan time calibration factor
  • ★【Compact Size for Easy Carriage】: Small size, multiple functions, simple operation, easy to carry
  • ★【Applicable】: The square wave output is also suitable for oscilloscope attenuators and probe pulse adjustment

    • DDS Function Signal Generator 1HZ-500KHz DDS Functional Signal Generator Signal Source Module Frequency Counter

    Category : BISS
    Brand : OKBYY
    Features
  • Brand new and high quality
  • The main output waveform : sine wave and square-wave, triangle wave, sawtooth wave
  • Maximum output amplitude:± 10Vpp (no-load)
  • Output impedance :50Ω±10%
  • Dc bias: ± 10V (no-load)

    • yotijar 1HZ-500KHZ FG-100 DDS Functional Signal Generator Frequency Testor Signal Source Module Frequency Counter

    Category : BISS
    Brand : yotijar
    Features
  • Frequency range: sine wave 1Hz-500kHz (where the output amplitude is flat to 200 kHz, the output amplitude will decrease as the frequency is further increased), other waveforms 1Hz-50kHz (but the upper limit of the adjustable frequency is not limited, if The requirements for distortion and shaking are not high, and the frequency of use can be further increased).
  • FG-100 DDS function generator is a low frequency signal generator.
  • Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave.
  • Small size, complete functions, simple operation, easy to carry.
  • Working with an oscilloscope, it can be used to troubleshoot the electronic circuit, characterize the audio amplifier frequency response or measure the response.

    • 1HZ-500KHZ FG-100 DDS Functional Signal Generator Frequency Meter Signal Source Module Frequency Counter

    Category : BISS
    Brand : WonVon
    Features
  • Feature FG-100 DDS Function generator is a low frequency signal generator.
  • It is small size, full function, easy operating and portable. Its power supply can be either AC/DC adaptor or a Lithium battery.
  • Working with an oscilloscope, it can be used to troubleshoot the electronic circuit, characterize the audio amplifier frequency response or measure the impulse response.
  • Due to the excellent DSS accuracy and frequency stability, it can also be used to calibrate the sweep time factor for oscilloscopes. You can also use its square wave to calibrate your oscilloscope attenuator or adjust your oscilloscope probe
  • Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave.

    • 1HZ-500KHZ FG-100 DDS Functional Signal Generator Frequency Meter Signal Source Module Frequency Counter

    Category : BISS
    Brand : EVTSCAN
    Features
  • Due to the excellent DSS accuracy and frequency stability, it can also be used to calibrate the sweep time factor for oscilloscopes. You can also use its square wave to calibrate your oscilloscope attenuator or adjust your oscilloscope probe
  • The square wave output is also suitable for oscilloscope attenuators and probe pulse adjustment.
  • Feature FG-100 DDS Function generator is a low frequency signal generator.
  • Working with an oscilloscope, it can be used to troubleshoot the electronic circuit, characterize the audio amplifier frequency response or measure the impulse response.
  • Small size, multiple functions, simple operation, easy to carry.

    • 1HZ-500KHz DDS Functional Signal Generator, Signal Source Module Frequency Counter

    Category : BISS
    Brand : Wbestexercises
    Features
  • The main output waveReplacement form : sine wave and squarewave, triangle wave, sawtooth wave
  • The main output waveReplacement form : sine wave and squarewave, triangle wave, sawtooth wave
  • The main output waveReplacement form : sine wave and squarewave, triangle wave, sawtooth wave
  • Power supply: DC 3.510V
  • Maximum output amplitude:± 10Vpp (noload)
  • Output impedance :50Ω±10%
  • Dc bias: ± 10V (noload)

    • Tbest Signal Generator,1HZ-500KHz DDS Functional Generator Signal Source Module Frequency Counter

    Category : Sports
    Brand : Tbest
    Features
  • The main output waveform : sine wave and square-wave, triangle wave, sawtooth wave Maximum output amplitude:± 10Vpp (no-load)
  • The main output waveform : sine wave and square-wave, triangle wave, sawtooth wave Maximum output amplitude:± 10Vpp (no-load)
  • The main output waveform : sine wave and square-wave, triangle wave, sawtooth wave Maximum output amplitude:± 10Vpp (no-load)
  • The main output waveform : sine wave and square-wave, triangle wave, sawtooth wave Maximum output amplitude:± 10Vpp (no-load)
  • The main output waveform : sine wave and square-wave, triangle wave, sawtooth wave Maximum output amplitude:± 10Vpp (no-load)
  • Output impedance :50Ω±10%
  • Dc bias: ± 10V (no-load)
  • Display: LCD1602
  • Resolution :1 Hz. : DC 3.5-10V

    • 1HZ-500KHZ DDS Functional Signal Generator, Seesii DDS Function Low Frequency Signal Generator Sine/Triangle/Square/Sawtooth Waveform

    Category : BISS
    Brand : Seesii
    Features
  • 1HZ-500KHZ DDS signal generator is small but has many functions, easy to operate and carry. The power supply can be either AC/DC adaptor or a Lithium battery.
  • It can be used with oscilloscope to test and debug electronic circuit, the frequency response of audio amplifier and impulse response,It also can calibrate the sweep time factor of oscilloscope.
  • The square waveform is suitable for oscilloscope attenuator and the adjustment of probe impulse response.
  • Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave.
  • This functional signal generator can test many kinds of wave forms such as: sine, square, triangle, positive and negative sawtooth waveform. It is especially designed for those professional worker.

    • Function Generator, DC 3.5-10V 1HZ-500KHz DDS Functional Signal Generator Sine Wave/Square-Wave/Triangle Wave/Sawtooth Wave Waveform Signal Generator Frequency Meter

    Category : BISS
    Brand : Yanmis
    Features
  • ➤【DDS TECHNOLOGY 】- The instrument adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals.
  • ➤【CONVENIENT OPERATION】- Abundant shortcut keys and graphical user interface simplifies every operation, which makes it easy to operate.
  • ➤【VARIOUS WAVEFORM】- The main output waveform : sine wave and square-wave, triangle wave, sawtooth wave.
  • ➤【FUNCTION GENERATOR PARAMETERS】- Maximum output amplitude:± 10Vpp (no-load); Output impedance :50Ω±10%; Dc bias: ± 10V (no-load); Display: LCD1602; Resolution :1 Hz.
  • ➤【OUTPUT FREQUENCY RANGE】- sine wave: 1Hz-500KHz; Square-wave: 1 Hz - 20kHz (the valid range); Triangle wave :1 Hz - 20KHz (the valid range); Sawtooth wave :1 Hz ~ 20kHz (the valid range).

    • Daytesy Function Generator -FG‑100 DDS Function Generator Sine Frequency 1HZ‑500KHz Counter Signal Source Generator Meter

    Category : Home
    Brand : Daytesy
    Features
  • The square wave output is also suitable for oscilloscope attenuators and probe pulse adjustment.
  • Due to the high precision and stable frequency of the DDS, it is also very suitable for the oscilloscope's scan time calibration factor.
  • The main output waveform are sine wave and square‑wave, triangular wave, sawtooth wave.
  • Frequency Range: Sine wave 1Hz~500kHz (Magnitude is flat up to 200kHz, above 200kHz, the magnitude may drop as frequency increases),
  • Have a filter (can be turn on/off ) to suit the output of sine wave and pulse wave.Small size, multiple functions, simple operation, easy to carry.

    • ASHATA Portable 1HZ-500KHZ DDS Functional Signal Generator Frequency Counter Sine + Square + Triangle + Sawtooth Waveform

    Category : Home Entertainment
    Brand : ASHATA
    Features
  • Small size, full-featured, easy to operate and easy to carry.
  • It can be powered by an adapter or a lithium battery.
  • Together with the oscilloscope, it can be used for electronic circuit testing and debugging, frequency characteristics of audio amplifiers and testing and measurement of impulse response.
  • Due to the good accuracy and frequency stability of DDS, it is also very suitable for oscilloscope scanning time factor calibration.
  • The square wave output is suitable for oscilloscope attenuator and probe pulse characteristic adjustment.

    • 4-20mA DC12/24V Signal Generator Module,Adjustable Current Signal Generator,Knob Operation,Response Fast,No Delay,with Polarity Protection,for Signal Source,Output Meter Test,Analog Transmitter

    Category : BISS
    Brand : Jectse
    Features
  • ADVANTAGE: Knob operation, adjust output response fast, no delay;Easy to use and convenient to connect wire with good performance
  • POLARITY PROTECTION : The power port has polarity protection and will not damage components when the power is reversed.
  • OPERATE： The test output is normal, you can use a multimeter to short-circuit the "4-20mA output" terminal
  • SUITABLE: Can be used for signal source, valve regulation, output meter test, LED test, analog transmitter.
  • PARAMETER: Power supply voltage: DC 12V or 24V (tolerance ±25%), total power <1W; output load impedance range: 0-350 ohms (DC12V); 0-800 ohms (DC 24V)

    • Colcolo 1Hz-500KHZ FG-100 DDS Function Generator Frequency Meter Signal Frequency

    Category : BISS
    Brand : Colcolo
    Features
  • FG-100 DDS function generator is a low frequency signal generator.
  • Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave.
  • Frequency range: sine wave 1Hz-500kHz (where the output amplitude is flat to 200 kHz, the output amplitude will decrease as the frequency is further increased), other waveforms 1Hz-50kHz (but the upper limit of the adjustable frequency is not limited, if The requirements for distortion and shaking are not high, and the frequency of use can be further increased).
  • Small size, complete functions, simple operation, easy to carry.
  • Working with an oscilloscope, it can be used to troubleshoot the electronic circuit, characterize the audio amplifier frequency response or measure the response.

    • Treedix 1HZ-500KHZ DDS Signal Generator Frequency Meter FG-100 DDS Function Sine and Pulse Wave Frequency Counter

    Category : BISS
    Brand : Treedix
    Features
  • Can be used to work with oscilloscope for electronic circuit testing and debugging, and the test and measurement of the frequency characteristics and impulse response of audio amplifiers.
  • Output waveform: sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave; There are filters that can be turned on and off, which can be well adapted to sine and pulse waveform output.
  • Suitable for oscilloscope sweep time factor calibration due to the good accuracy and frequency stability.
  • The square wave output is suitable for oscilloscope attenuator and probe pulse characteristic adjustment, etc.
  • Can be powered by an adapter or a lithium battery; Small size, complete functions, simple operation, easy to carry.

    • HiLetgo ICL8038 Signal Generator Medium/Low Signal Frequency 10Hz-450KHz Triangular/Rectangular/Sine Wave Generator Module 12V to 15V

    Category : BISS
    Brand : HiLetgo
    Features
  • Working voltage: 12V ~ 15V
  • Frequency range: 10HZ -- 450kHz
  • Output: Triangular wave, Square wave and sine wave.
  • Low distortion sine wave: 1%
  • Duty cycle range: 2% to 98%

    • 1HZ-500KHZ FG-100 DDS Functional Signal Generator

    Category : BISS
    Brand : Holidaya

    Irfora DDS Function Low Frequency Signal Generator Sine/Triangle/Square/Sawtooth/ECG/Noise Output 1Hz-500kHz Frequency Amplitude DC4~10V Voltage

    Category : BISS
    Brand : Irfora
    Features
  • Output Waveform: can output sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, electrocardiogram wave, noise wave. High-speed square wave. High-speed frequency (HS) output up to 16MHz, Can choose 1MHZ, 2MHZ, 4MHZ, 8MHZ, 16MHZ.
  • DDS Frequency Range: sine wave 1Hz-500kHz (the output amplitude will decrease with the further increase of frequency), other waveforms 1Hz-100kHz (but the upper limit of adjustable frequency is not limited, if the distortion and shaking requirements are not high, use the frequency can be further increased).
  • DDS signal amplitude of the offset amount can be adjusted separately by two potentiometers.
  • All setting parameters can be saved, the power will restore the last used configuration automatically.
  • LCD display to indicate the data accurately. Comes with a power adaptor for power supply.

    • 1HZ-500KHZ DDS Functional Signal Generator,Function Generator Sine/Triangle/Square/Sawtooth/ECG/Noise Output,DC4~10V

    Category : Tools
    Brand : Kecher
    Features
  • Output Waveform: can output sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, electrocardiogram wave, noise wave. High-speed square wave.
  • Power Supply: DC4~10V. It is recommended to choose DC5V when using the adapter, and 3.7V lithium battery when using battery power.
  • Current: 160mA when the voltage is 5V.
  • DDS Frequency Range: sine wave 1Hz-500kHz (the output amplitude will decrease with the further increase of frequency), other waveforms 1Hz-100kHz (but the upper limit of adjustable frequency is not limited, if the distortion and shaking requirements are not high, use the frequency can be further increased).
  • High-speed frequency (HS) output up to 16MHz, Can choose 1MHZ, 2MHZ, 4MHZ, 8MHZ, 16MHZ.

    • Dorhea 1Hz-65534Hz DDS Function Signal Generator DIY Function Generator Module Low Frequency LCD Display Compatibel with Sine Square Sawtooth Triangle Signal Testing

    Category : BISS
    Brand : DORHEA
    Features
  • The frequency range of this DDS signal generator is 1Hz-65534Hz, and the high-speed frequency (HS) output is up to 8MHz.
  • The power supply automatically restores the last used configuration, power supply: DC 9V.
  • This portable DDS signal generator has an LCD display, which can clearly display the readings. This DDS signal generator has intuitive touch buttons, which is very convenient to use.
  • This DDS signal generator has a very wide range of applications, and can test sine waves, square waves, sawtooth waves, anti-sawtooth waves, triangle waves, ECG waves and noise waves. The function generator module main functions of DDS sine rectangular sawtooth are the upper output waveform selection, the DOWN output waveform selection, and the left and right keys to set the output frequency.
  • This DDS signal generator has high quality and excellent performance. The amplitude of the DDS signal of the offset can be adjusted separately by two potentiometers.

    • HiLetgo 5pcs NE555 Pulse Frequency Square Wave Rectangular Wave Signal Generator Signal Generator Module Stepper Motor Driver DC 5V-15V Powered

    Category : BISS
    Brand : HiLetgo
    Features
  • Type:Accessories,
  • Accessories Function:Motor,
  • Model:LDTR-417995,
  • Dimension(cm):7*5*2,
  • Net Weight(kg):0.006,